Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Flowmaster Exhaust Tip - 3.50 In. SS Rolled Edge Angle Cut Fits 3.00 In. Tubing - Weld On
Part #: 15317
$58.83
$52.95
For each
For each
Free Shipping! *to continental U.S. only
Fits On:
All Vehicles (Universal)
Description:
This Flowmaster exhaust tip features single wall construction with a rolled, slash cut edge and is manufactured from T304 stainless steel. The weld on tip has a fully polished finish, with the Flowmaster logo embossed boldly on the top. Designed to weld to 3.00? pipe, this tip has a diameter of 3.50? at the outlet and is 5.25? in length.
• Variety of sizes and finishes
• Premium quality
• Clean modern look
• Clamp on design
• Laser etched with Flowmaster logo
(For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.gov
This Flowmaster exhaust tip features single wall construction with a rolled, slash cut edge and is manufactured from T304 stainless steel. The weld on tip has a fully polished finish, with the Flowmaster logo embossed boldly on the top. Designed to weld to 3.00? pipe, this tip has a diameter of 3.50? at the outlet and is 5.25? in length.
• Variety of sizes and finishes
• Premium quality
• Clean modern look
• Clamp on design
• Laser etched with Flowmaster logo
(For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.gov
All Flowmaster muffler tips are stainless steel and embossed the the Flowmaster logo.
Flowmaster was founded in 1983, and today is housed in two ultra-modern facilities together totaling over 400,000 sq. ft., one in Santa Rosa, and the other in West Sacramento, California. Flowmaster employs over 250+ workers dedicated to building the highest quality U.S. made exhaust products available.
Flowmaster operates the only exhaust Research & Design facilities of its kind in the world, centered around the SuperFlow SF-7100 engine dynamometer complete with E.C.A. (engine cycle analysis) equipment and also SuperFlow chassis dyno's. Through use of these dyno's, Flowmasters engineering staff can track the complete engine cycle in millionths of a second and can obtain exact technical data of each degree of cam rotation, from induction to the tip of the exhaust system, while also showing the power numbers that really matter, the power numbers "to the ground." Flowmaster also utilizes Spectrum Analyzers to fine "tune" the sound of each of the eleven different series of mufflers that Flowmaster currently offers, both for peak performance and just the right sound levels and tones.
Flowmaster was founded in 1983, and today is housed in two ultra-modern facilities together totaling over 400,000 sq. ft., one in Santa Rosa, and the other in West Sacramento, California. Flowmaster employs over 250+ workers dedicated to building the highest quality U.S. made exhaust products available.
Flowmaster operates the only exhaust Research & Design facilities of its kind in the world, centered around the SuperFlow SF-7100 engine dynamometer complete with E.C.A. (engine cycle analysis) equipment and also SuperFlow chassis dyno's. Through use of these dyno's, Flowmasters engineering staff can track the complete engine cycle in millionths of a second and can obtain exact technical data of each degree of cam rotation, from induction to the tip of the exhaust system, while also showing the power numbers that really matter, the power numbers "to the ground." Flowmaster also utilizes Spectrum Analyzers to fine "tune" the sound of each of the eleven different series of mufflers that Flowmaster currently offers, both for peak performance and just the right sound levels and tones.
Q: What is a muffler tip? Why buy a muffler tip?
A: Muffler tips are a universal fit and can be clamped to any exhaust system up to a certain inlet diameter, usually 2.5"-3.5". Muffler tips provide added style to your car's tailpipe, and they come in a wide variety of finishes and shapes.
Q: Can muffler tips be installed on any vehicle?
A: Muffler tips are universal and clamp on to any exhaust piping between 2.5 inch -3.5 inch inlet sizes.
A: Muffler tips are a universal fit and can be clamped to any exhaust system up to a certain inlet diameter, usually 2.5"-3.5". Muffler tips provide added style to your car's tailpipe, and they come in a wide variety of finishes and shapes.
Q: Can muffler tips be installed on any vehicle?
A: Muffler tips are universal and clamp on to any exhaust piping between 2.5 inch -3.5 inch inlet sizes.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Car Exhaust Pipe Tip Rear Tail Throat Muffler Stainless Steel Round Accessories
Exhaust Tip Muffler Pipe Black Coating Stainless Steel Fit 2.5 inlet 3.5 Outlet
FOR 18-2022 HONDA ACCORD SPORT TOURING AKASAKA QUAD TIP MUFFLER EXHAUST FINISHER
2.5" Inlet 4.125" Slant Titanium Burnt Stainless Steel Exhaust Muffler Tip
Stainless Steel Tail Bumper Muffler Tip For 2006-2013 E-Class AMG W212
