Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
Flowmaster Prebent Tailpipe - Aluminized Steel
Part #: 15811
$236.00
$212.40
For each
For each
Free Shipping! *to continental U.S. only
Fits On:
88-98 Chevrolet C- and K-Series Truck C1500 and K1500 Pickups., 88-98 GMC C- and K-Series Pick-Up C1500 and K1500 Pickups.
Description:
Prebent Tailpipe 2.5 in. - Side Exit, 1 Pair - Aluminized Steel
Flowmaster introduces their dual 2.50 pre-bend tailpipes for 1988-1998 GM C/K1500 pickup trucks. These are universal type parts that are constructed in aluminized steel and do not include any hangers, mounts, tips, etc. They are intended to be used with a single inlet, dual outlet muffler located on the right (passenger) side of the vehicle. The pipes exit out both sides of the vehicle behind the rear tires. These tailpipes are manufactured in the USA and are mandrel bent to maximize performance.
Aluminized Steel Construction
Dual Side Exit
Smooth Mandrel Bent Design
Made in the USA
(For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Prebent Tailpipe 2.5 in. - Side Exit, 1 Pair - Aluminized Steel
Flowmaster introduces their dual 2.50 pre-bend tailpipes for 1988-1998 GM C/K1500 pickup trucks. These are universal type parts that are constructed in aluminized steel and do not include any hangers, mounts, tips, etc. They are intended to be used with a single inlet, dual outlet muffler located on the right (passenger) side of the vehicle. The pipes exit out both sides of the vehicle behind the rear tires. These tailpipes are manufactured in the USA and are mandrel bent to maximize performance.
Aluminized Steel Construction
Dual Side Exit
Smooth Mandrel Bent Design
Made in the USA
(For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.gov
All Flowmaster muffler tips are stainless steel and embossed the the Flowmaster logo.
Flowmaster was founded in 1983, and today is housed in two ultra-modern facilities together totaling over 400,000 sq. ft., one in Santa Rosa, and the other in West Sacramento, California. Flowmaster employs over 250+ workers dedicated to building the highest quality U.S. made exhaust products available.
Flowmaster operates the only exhaust Research & Design facilities of its kind in the world, centered around the SuperFlow SF-7100 engine dynamometer complete with E.C.A. (engine cycle analysis) equipment and also SuperFlow chassis dyno's. Through use of these dyno's, Flowmasters engineering staff can track the complete engine cycle in millionths of a second and can obtain exact technical data of each degree of cam rotation, from induction to the tip of the exhaust system, while also showing the power numbers that really matter, the power numbers "to the ground." Flowmaster also utilizes Spectrum Analyzers to fine "tune" the sound of each of the eleven different series of mufflers that Flowmaster currently offers, both for peak performance and just the right sound levels and tones.
Flowmaster was founded in 1983, and today is housed in two ultra-modern facilities together totaling over 400,000 sq. ft., one in Santa Rosa, and the other in West Sacramento, California. Flowmaster employs over 250+ workers dedicated to building the highest quality U.S. made exhaust products available.
Flowmaster operates the only exhaust Research & Design facilities of its kind in the world, centered around the SuperFlow SF-7100 engine dynamometer complete with E.C.A. (engine cycle analysis) equipment and also SuperFlow chassis dyno's. Through use of these dyno's, Flowmasters engineering staff can track the complete engine cycle in millionths of a second and can obtain exact technical data of each degree of cam rotation, from induction to the tip of the exhaust system, while also showing the power numbers that really matter, the power numbers "to the ground." Flowmaster also utilizes Spectrum Analyzers to fine "tune" the sound of each of the eleven different series of mufflers that Flowmaster currently offers, both for peak performance and just the right sound levels and tones.
Q: What is a muffler tip? Why buy a muffler tip?
A: Muffler tips are a universal fit and can be clamped to any exhaust system up to a certain inlet diameter, usually 2.5"-3.5". Muffler tips provide added style to your car's tailpipe, and they come in a wide variety of finishes and shapes.
Q: Can muffler tips be installed on any vehicle?
A: Muffler tips are universal and clamp on to any exhaust piping between 2.5 inch -3.5 inch inlet sizes.
A: Muffler tips are a universal fit and can be clamped to any exhaust system up to a certain inlet diameter, usually 2.5"-3.5". Muffler tips provide added style to your car's tailpipe, and they come in a wide variety of finishes and shapes.
Q: Can muffler tips be installed on any vehicle?
A: Muffler tips are universal and clamp on to any exhaust piping between 2.5 inch -3.5 inch inlet sizes.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
RBP BOLT ON BLACK DIESEL TRUCK EXHAUST MUFFLER TIP TAILPIPE 4" INLET 5" OULET
G63 Muffler Tips G500 G550 Dual Exhaust G-Wagon Logo 4 Pipes G55 G550 1990-2024
C63 Quad Chrome Muffler Tips AMG C250 C300 C350 Mercedes W204 2008-2014 C-Class
For 2018-2020 Honda Accord Exhaust Tip Tail Muffler Pipe Modified w/ Bracket Kit
3.5'' Universal Removable Stainless Muffler Silencer Insert Car Exhaust Pipe Tip
