Contact
Andy's Parts Smarts
Cart
Hello, Sign In!
Select Your Vehicle
Select Your Vehicle
JLT Painted Plastic Ram Air Upgrade Kit - Dark Highland Green
Part #: RAI2U-FMG-9604-P-PY
$179.00 For kit
Free Shipping! *to continental U.S. only
Fits On:
96-98 Mustang GT, 99-04 Mustang GT
Description:
This upgrade kit has all the needed parts to "upgrade" your existing JLT Ram Air intake into the new Next Generation kit. Only works if you currently have a JLT Ram Air Intake kit.
• New Tube Design: Using the original JLT RAI as a guide, JLT has molded, sculpted and perfected everything until they had the best looking, fitting and performing system you can buy. The new JLT tube is 4" roto molded plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!!
• New Heat Shield Design: The heat shield is all new as well. Vacuum formed from ABS plastic and designed to not only look good, but block engine heat at low speed and idle.
• Finish Options: Standard finish is an OEM looking black textured plastic and also available in your cars exact body color. All painted tubes go through an in-depth process to remove all the texture, then they use only the best quality materials to give each tube a smooth gloss finish.
• Includes: JLT plastic intake tube, Silicone Reducer at MAF, ABS Heat Shieldm, HD Clamps and all needed hardware.
This upgrade kit has all the needed parts to "upgrade" your existing JLT Ram Air intake into the new Next Generation kit. Only works if you currently have a JLT Ram Air Intake kit.
• New Tube Design: Using the original JLT RAI as a guide, JLT has molded, sculpted and perfected everything until they had the best looking, fitting and performing system you can buy. The new JLT tube is 4" roto molded plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!!
• New Heat Shield Design: The heat shield is all new as well. Vacuum formed from ABS plastic and designed to not only look good, but block engine heat at low speed and idle.
• Finish Options: Standard finish is an OEM looking black textured plastic and also available in your cars exact body color. All painted tubes go through an in-depth process to remove all the texture, then they use only the best quality materials to give each tube a smooth gloss finish.
• Includes: JLT plastic intake tube, Silicone Reducer at MAF, ABS Heat Shieldm, HD Clamps and all needed hardware.
JLT Performance, based out of Chesapeake, Virginia, is a company that specializes in cold air intakes for a large variety of American cars. Whether you're looking to improve your Mustang's "giddy-up" or add some more "oomph" to your Hemi, the guys at JLT have something for you. Their focus on the intake side of things indicates their focus and insistence on delivering high-quality intakes that will give you quick and reliable horsepower.
Q: Do you have to buy an air filter if you're buying a cold air intake?
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
A: Cold air intakes are usually sold with all the components needed including the filter and all adapters.
Q: Are cold air intakes offered for every vehicle?
A: Cold air intakes are not offered for every vehicle and are vehicle specific. There are no universal kits available on the market.
Q: What do cold air intakes do? Why buy a cold air intake?
A: Cold air intakes bring more air into the engine, which creates more power during combustion. Cold air intakes will generally help with throttle response and higher power gains, adding a pleasing induction sound to your engine under acceleration. A cold air intake also significantly cleans up your under-hood appearance and makes it easier to see and access components of your engine bay.
Q: What's the difference between a cold air intake and a short ram intake?
A: Cold air intakes are usually placed in the fender well area, which brings in a cooler charged air from beneath the car (outside of the engine bay), which is denser and therefore creates more power. The piping is a lot longer than a short ram which means the power gains are not seen until the mid to higher RPM band. A short ram intake is located inside the engine bay and creates power with better response times than a cold air, however the air is not as dense, which means that it doesn't make as much power in the upper RPM region and makes less power overall.
Q: How do you install a cold air intake?
A: Cold air intakes are a true bolt-on application. The removal of your factory air box and resonator will be needed and the cold air intake installed in its place. Basic hand tools are needed, and the intake installs in minutes.
If you live in California, please note this item may be subject to a Proposition 65 warning. Click here to learn more.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not able to find what you are looking for?
Cold Air Intake Kit Red Filter For 2016-2021 Civic 1.5L Turbo Except Si
cold air induction kit filter charge for Honda Civic 10th Gen 1.5L turbo 2016+
Aresmech For 15-23 F150 2.7L/3.5L V6 Twin Turbo COLD AIR INTAKE KIT+Heat Shield
For 11-15 Sonata 2.4L 4cyl Black Cold Air Intake + Stainless Air Filter
For 2011-2023 Charger/Challenger/300 3.6 V6 Heat Shield Cold Air Intake +Filter
